Bracelet Made With Broken Bangles
You Will Need:
Fevicryl Fabric Glue, Broken bangles, Silk thread (colour of your choice),1 round kundan stone(with hole),Needle,Scissor, Cardboard or notebook, Stones and stickers.
Description :
I have made a bracelet with waste broken kangan.STEP 1
Take 2 bangles,I have used waste broken lak kangan bases.
STEP 2
Take silk thread of any colour of your choice.Wrap 25 round of silk thread around a cardboard or notebook,thne cut it with scissor,apply some glue on the threads end & leave for few seconds.
STEP 3
Take 1 bangle & apply glue on inner surface & stick the threads on it,leave it for few seconds to dry,then start wrapping threads around bangle & apply glue at the end on inner surface of bangle & cut access threads.
STEP 4
Repeat same process with second bangle.
STEP 5
Take silk thread & wrap 15 rounds around a cardboard,cut it,apply glue at the end,leave for few seconds for drying.
STEP 6
Take both the bangles,apply some glue on inner surface of both the bangles,stick the threads on it,leave it for few minutes for drying.
STEP 7
Take both the bangles together & start wrapping the threads around bangles covering small parts of bangles,apply glue at the end,cut the access threads,leave it for drying properly.
STEP 8
Put the kundan stone(with holes) on the middle part of bangles separating both the bangle,stitch the kundan along bangles with needle & thread(same silk thread) on both side of kundan holes & make knot.Apply glue on back side of kundan along bangle on both side.Stick 1-1 layer of stones stickers on both bangles for decorating them.Leave it for few hours.Now your bracelet is ready.
+91 99676 55545