Fevicryl Modge Podge glue is best used for decoupage a French art and craft technique in which objects are decorated by sticking paper cut-outs.
Works on multiple substrates: Wood, Glass, Metal, Fabric.
2-in-1 properties: Sealer Cum Varnish.
Non-toxic: Conforms to EN713 European standard.
Feviart - Modge Podge Special
Download our magazine for an interesting compilation of varied surfaces that have been artistically decoupaged.Download PDF
The ingredients in Modge Podge are not the same as a typical craft glue. Special ingredients are added for enhancing the durability thereby making it suitable for long lasting projects.
You can apply 2 or more coats depending on the effect you are looking for. The more the number of coats are, the softer the effect is.
Fevicryl Mod Podge is uniquely formulated in such a way that it can be used on MDF, Wood, Glass, Metal, Fabric etc one can avoid using it on Ceramics, Plastics and other products which comes in contact with water.
Decoupage directly on walls is not recommended as the wall surface differs.
Recommended papers are decoupage tissues, decoupage papers, Newspaper cut-outs, Rice paper, magazine paper, packing paper, scrapbook paper and more.
Try applying decoupage glue with a flat brush and soft hand. Apply glue more than 2 times. Secondly use a sponge or a sponge applicator to apply decoupage glue to minimise brush strokes.
One can use a blow dryer ( Mild / moderate hot setting mode ) to speed up the drying process. Drying depends on how thick the application is. Thicker layer of application / deposition will take more time for drying.
While doing decoupage tear the edges rather than cutting them. Paste the paper and then use a sharp cutter to cut the extra paper over the edge. Or use sand paper to merge the paper with the surface using glue or paint.
Once cured, it can withstand gentle cleaning done with mild soap & water however It's not totally waterproof. It should not come in continuous contact with water. Outdoor exposure, harsh washing / cleaning with sharp objects & scrubbing should be avoided.
It is EN 71 , Part III Compliant product. Direct contact with food items / eatables should be avoided.
Curing time depends on deposition / thickness of the coating. Normal drying time is 15-20 minutes between the coats.
One can apply a clear matt varnish or spray for the same.
Yellowing over a period is not expected if the project is well preserved indoors.
Currently showing store(s) close to you
Decoupage paper/napkins, Modge Podge glue, applicator/ brushes, paper cutter/sandpaper, acrylic colours & varnish(optional)
A surface like wood, glass, board or terracotta
Select the surface you want to decoupage and prepare the surface by painting a base coat if required.
Tear or cut the paper to fit your design.
Pour required amount of Modge Podge into a bowl and apply it on the paper or surface with an applicator or brush depending on the surface area.
Gently stick the paper onto the surface and simultaneously remove air vacuoles if any. Trim any excess paper with a cutter or sandpaper and leave it to dry.
Apply another layer of Modge Podge on top and leave it to dry. You can apply multiple layers of glue depending on the gloss required.
Finish your artwork with a coat of varnish if required.
As a Fevicryl Certified Specialist, I would say in a nut shell to the art and craft enthusiasts Modge Podge glue - the all in one glue and a good sealer, dries faster for multiple coat build up.
This is a great adhesive I came across. It provides equal smoothness and consistency when applied to any surface. The thickness is so perfect that makes application so easy and dries very quickly. The non-sticky property of the this glue gives more reasons to use it while doing decoupage, as it doesn't remain on fingertips when applying tissue in surface. It gives a perfect glossy finish to any object.
Sticking the paper was very easy and neat. not even a single bubble turned up. Finishing was neat. Application also easy. in fact i used my fingers. Satisfied with the result.