Home Do-It-Yourself Fabric Craft Traditional Dome Ring

Traditional Dome Ring

March 18, 2021
You Will Need:

Fevicryl Fabric glue, Buckram, OHP sheet, Fevicryl Acrylic Pearl Metallic Gold, Imitation ring, Eye pins/ Tassel sticks, Decorative materials like kundan, Diamond chain, Ball chain, Stones of various colours, Zarkan, Small gold rings, Gold beads, Paper scissors, Fabric scissors, Marker, Pencil, Compass, Scale, Waste fabric.

Description :
 Create this amazing handmade from scratch traditional ring using Fevicryl Fabric Glue which can be customised according to the attire you choose to wear this wedding season.
 
STEP 1
Cut 3” x 3” square from an OHP sheet. Use paper scissors to cut it.
STEP 2
Draw a circle on the square piece using a marker and a compass with 1.5” radius.
STEP 3
Cut the circle using a paper scissors and make a slit as seen in the image above.
STEP 4
Cut a similar circle with a slit from buckra
STEP 5
Paint the buckram piece using Fevicryl Pearl Metallic Gold. Let it dry.
STEP 6
Stick the cut sides of the OHP circle on each other using Fevicryl Fabric Glue to create a cone as seen in the image. Let it dry.
STEP 7
Make a similar cone with the painted buckram circle and stick it on the inside of the OHP cone as seen in the image above using Fevicryl Fabric Glue. Let it dry.
STEP 8
Stick diamond chain and ball chain at the bottom of the cone as seen in the image using Fevicryl Fabric Glue. Let it dry.
STEP 9
Decorate the whole cone as seen in the image above or as per your choice using Fevicryl Fabric Glue. Let it all dry.
STEP 10
Cut a card paper circle keeping the measurement of the bottom of the cone in mind. Use paper scissors to cut it.
STEP 11
Stick the circle at the bottom of the cone as shown in the image using Fevicryl Fabric Glue. Let it dry.
STEP 12
12. Stick the tassel sticks/ eye pins as the bottom of the cone as shown in the image using Fevicryl Fabric Glue. Let it dry thoroughly.
STEP 13
Draw and cut a circle on buckram again but measuring the bottom of the cone made. Use fabric scissors to cut it.
STEP 14
Place the buckram piece on top of the tassel sticks as shown in the image. Stick it using Fevicryl Fabric Glue.
STEP 15
Stick the imitation ring in the centre using Fevicryl Fabric Glue. Let it dry.
STEP 16
Cut and paint another circle measuring the bottom of the cone cut the circle into 2 and make sure to leave space for the ring area.
STEP 17
Stick the coloured buckram at the bottom as shown in the image using Fevicryl Fabric Glue. To give it a good finish, cut and paint a small strip of buckram and place it where the ring is visible. This will cover the sticking part of the ring. Let it all dry.
STEP 18
This beautiful studded handmade dome ring is ready to be worn to your best friend’s wedding this summer!