Shilpkar Ganesha
You Will Need:
Fevicryl Shilpkar, Fevicryl Terracotta Primer, Fevicryl No Stitch Fabric Glue, Fevicryl Glass Colour - Solvent Based, Plywood, Kundans
Description :
I tried creating a beautiful Ganesha on Plywood using Shilpkar and Solvent Based Glass Colours.For more Ideas : Visit my FB Page https://www.facebook.com/pages/Color-n-Texture/1591117191124966
STEP 1
Take a MDF board of the desired size.
Draw or trace the Ganesha in the centre of the board.
STEP 2
Apply Fabric Glue as shown in the picture.
STEP 3
Mix Fevicryl Shilpkar Resin Base & Hardener to form an even dough. Make thin coils from the dough. Place the coil on the area where fabric glue is applied and let it dry completely.
STEP 4
Cut the portion not needed with a knife as shown in the picture.
STEP 5
Start completing the whole Ganesha using Shilpkar coils.
STEP 6
Let it dry completely.
STEP 7
Apply a coat of Terracotta Primer on it.
Let it dry completely.
STEP 8
Apply Solvent Based Glass Colours as shown in the picture.
STEP 9
Let it dry completely.
STEP 10
Paste Kundans as shown in the picture and your Ganesha is ready !!!
+91 99676 55545