Lampshade

STEP 1:-

Take an A-4 sized drawing paper
Draw a face and divide it into sections with a curvy liner pattern

STEP 2:-

Place an A4 sized OHP sheet on the design drawn and trace it using 3D Cone Outliner – Black
Repeat the procedure again on another OHP sheet
Let them dry

STEP 3:-

Fill the design with Water Based Glass Colours in the colours of your choice
You may mix two colours to get a different shade
The skin tone in a shade made by mixing Golden Yellow 852, White 858 and Brown 855
Let it dry

STEP 4:-

Take a cylindrical lampshade of about 12 inches in height
Take both the coloured OHP sheets and place them on the back and front side of the lampshade
Stick the edges overlaping each other on the sides using No Stitch Fabric Glue

STEP 5:-

Take both the coloured OHP sheets and place them on the back and front side of the lampshade
Stick the edges overlaping each other on the sides using No Stitch Fabric Glue

Fevicryl 3D Cone Outliner – Black 708, Hobby Ideas Water Based Glass Colours (box of 10 Shades), Fevicryl No Stitch Fabric Glue A4 sized OHP Sheets - 2, White A4 sized Drawing Paper, Pencil, Eraser, Cylindrical Lampshade