Lace Work Jute Mat
April 20, 2015
You Will Need:
Fevicryl Acrylic Colour - White 27, Fevicryl 3D Cone Outliner - White 707,Fevicryl No Stitch Fabric Glue, Fine Art Brush - Round No. 7, Blue Circular Jute piece of 9
Description :
Lace Work Jute MatSTEP 1
Trace the design on the blue fabric using white carbon.
STEP 2
Fix the embroidery frame to the cloth. Stretch the cloth well.
STEP 3
Pour Acrylic Colour - White on the palette, dilute the colour to about 25%, adding water using Fine Art round brush. Fill the diluted colour in thw design marked (a), the filling should be neat and uniform.
STEP 4
Pour Acrylic Colour - White on the palette, dilute the colour to about 15%, adding water using Fine Art round brush. Fill the diluted colour in thw design marked (b) in the design.
STEP 5
After the colour dries, Using Fevicryl 3D Cone Outliner - White, outline the whole design completely.
STEP 6
On the area marked as (b), give line work using 3D Cone Outliner as shown in the picture.
STEP 7
On the plain area of the design (c) give lines as shown in the picture.
STEP 8
After the linear work dries, using Fabric Glue paste the cloth to the Jute, which has to be slightly bigger than the cloth.
Note: This Lace technique can be done on Fabric and Non Fabric surfaces.
+91 99676 55545