Rangoli Design Hanky
You Will Need:
White cloth, Frame, Tile, Design paper, Carbon paper, Pencil, Fine Art Brush, Fevicryl Acrylic Colours (White-27, Crimson-04, Orange-17), Fevicryl 3D Cone Outliner Light Green-704
Description :
ONE STROKE DESIGNED HANKYSTEP 1
Pour the required two contrast Fevicryl Acrylic colours on the tile side by side.
STEP 2
Dip the flat brush in water,drain out the excess water by pressing the brush gently on the tissue paper. The brush should be damp.
STEP 3
Scoop first colour in one corner of the brush,immediately scoop second colour on the other corner.
STEP 4
Run the loaded brush on the tile up and down(both the side) with a little pressure.
STEP 5
The above procedure should be done minimum three times for the first loading.
STEP 6
Later loading can be repeated depending on the requirement.
STEP 7
By following the above steps paint the design with appropriate colours and leave it to dry.
STEP 8
After use clean the brush under running water.
+91 99676 55545