Ornate Shoulder Jewellery
You Will Need:
Fevicryl Premium Fabric Glue, Golden / Yellow Colour Cotton Silk / Art Silk Fabric, Brown Colour Cotton Fabric, Thin Sponge Sheet, Paper, Pencil, Scissor, Embellishment Material ( Different Types And Shapes Of Stones , Sliver And Golden Cutdana , Golden Small Size Cutdana , Golden Beads , Golden Brown Cutdana , Jarkan, Diamond Chain , Golden Designer Chain, Clips, Yellow / Orange Colour Thread, Needle, Barbecue Stick
Description :
Elegant and stylish gold shoulder jewellery that can be worn on any plain dress to elevate the look and turn it into a party wear made using Fevicryl Fabric Glue.
STEP 1 : Select the base
- Take 2 pieces of fabric, one gold/yellow in colour and the other would be brown.
- Gold/yellow will be used as the top part and brown as the bottom part.
- Silk/ cotton silk/art silk fabric will be used as the top part where the work will happen
- Cotton fabric will be used for the base.
STEP 2 : Construction
- Construct a semi circle on the top base as well as the bottom base measuring 4” in height and 10” length.
- Draw the semicircle using a compass and fabric pencil.
- Make sure to leave 0.5” on all the sides for folding and finishing.
- Draw this on the lower base fabric as well.
STEP 3 : Cutting and folding
- Cut the semicircle using fabric scissors.
- make small cuts on the 0.5” space near the curve.
- These help in folding the curve edge better.
- Stick these corners using Fevicryl Fabric Glue.
- Let it dry.
- Do the same with the lower base fabric piece.
STEP 4 : Embellishments
- Take various types of stones and beads and embellishments as seen in the image above.
- Take different kinds of metal chains and 2-3 pins that can be used at the back of the ornament.
STEP 5 : Sticking
- Using the materials, embellish the top semicircle base as seen in the image given.
- Make sure to fill each and every gap in the design.
- The design is upto the individual making it as well as on the embellishments they have.
- Use Fevicryl Fabric Glue to stick them all
- Let it all dry completely
STEP 6 : Dangler
- Using needle and thread, start making danglers of various heights ( short to long) or all of the same heights.
- Use cutdana and gold beads to make the danglers
STEP 7 : Attachment of danglers
- Take the danglers and insert them at the back of the ornate piece with one stitch as seen in the image given.
STEP 8 : Attachment of danglers
- This is how the danglers will look once they are all attached.
- They take the shape of a “v” here as seen in the image.
STEP 9 : Foam Sheet
- Take a foam sheet and cut 4” in height and 10” length with a semicircle
- Do not leave 0.5 inch around
STEP 10 : Sticking the foam sheet
- Take a foam sheet and stick it at the back of the ornate piece as seen in the image
- Stick it using Fevicryl Fabric Glue.
- Let it dry
- Take the bottom piece of the semi circle (dark brown) and stick it on the foam using Fevicryl Fabric Glue.
- Let them all dry
STEP 11 : 2 pieces
- Make 2 such pieces in total as shown in the image
- Make sure to attach the pins at the back using Fevicryl Fabric Glue.
STEP 12 : Final look
The ornate shoulder jewellery patch is ready to be worn on any simple garment u own to bring it to life with bling and glitter!.