Like what you read!



DO-it-yourself ideas

Learn to create fun stuff at home, assorted by craft categories and more.

Upload Your Own Creations


| Clay Modeling


Difficulty Level Intermediate

Classy nameplate to adorn the door.

how to do it yourself

STEP 1:-

To make border on the board, take tissue paper and twist it in long strips. Stick it on the border of the board using Fevicryl No Stitch Fabric Glue.
Leave to dry.

STEP 2:-

Nameplate - Step 2 | Hobbyideas

Paint the board and border with Fevicryl Sparkling Pearl Colour- Turquoise Blue.
Leave to dry.

STEP 3:-

Write the name with pencil on the board in font style of your choice.

STEP 4:-

Take Fevicryl Shilpkar, mix the resin base and hardener evenly to form even dough.
You can sprinkle little talcum powder on your hands to avoid sticking.

STEP 5:-

Nameplate - Step 5 | Hobbyideas

To write the name on the board, take Shilpkar dough and roll it into long coils.
Apply Fevicryl No Stitch Fabric glue on the written alphabets, stick the coil on it. Use cutter to cut the coil according to the size required.
Leave to harden.

STEP 6:-

Paint the Shilpkar alphabets using Fevicryl Sparkling Pearl Colour- Dark Copper.
Leave to dry.
Highlight the alphabets with Fevicryl Sparkling Pearl Colour- Silver.
Leave to dry.

STEP 7:-

Apply 2-3 coats of Fevicryl No Stitch Fabric Glue on the nameplate to get a glossy look.
Leave to dry.

STEP 8:-

Stick double sided foam tape on the back side.

you will need

Fevicryl Shilpkar- 1-2 packs, Fevicryl Sparkling Pearl Colours- Silver 910, Turquoise Blue 905, Dark Copper 914 ,Fevicryl No Stitch Fabric Glue, Fine Art Brushes- Round brush no: 2 & 5. File board/ Mount board/ MDF board- size 8 inches X 5 inches ,Tissue paper or toilet roll paper ,Double sided foam tape, Pencil ,Paper Cutter, Scissors ,Talcum powder.