X

Like what you read!

share

Do-it-yourself

DO-it-yourself ideas

Learn to create fun stuff at home, assorted by craft categories and more.

Upload Your Own Creations
Do-it-yourself

Name plate

| Mixed Media

By Pooja | Gurgaon, Haryana

Difficulty Level Intermediate

Crackle effect Name Plate on tile

how to do it yourself

STEP 1:-

Take a plain tile, clean it properly. Now take glue n spread it on tile. Take acrylic colours of your choice and add some water to make colour a bit thin. Now throw few drops of those colours one by one on the tile.

STEP 2:-

Now move the tile left to right. Or tilt the tile to let the colours spread. Once the tile is covered with colours, leave it to dry for some time.

STEP 3:-

After few minutes you will see the cracks in the colours. It means the crack effect is coming. Now let the colour dry. (it can take more than 5 hours)

STEP 4:-

Once the tile is dry and ready with crack effect, it's time to write name with Shilpkar.
Take both parts of Shilpkar in equal quantity and mix well till it gets white.
Now take small portion and roll it with your hands to make thin straw shape. Now take Fevicol MR n paste the Shilpkar on tile as shown in main picture above. Write the name using Shilpkar. let it dry.

STEP 5:-

Now paint the name with the colours of your choice. And your name plate is ready.

you will need

Tile, Fevicryl Arylic Colours(2-3)of your choice, Fevicol MR, Fevicryl Shilpkar.

Comments

Close