Liquid Embroidered Santa Scroll

STEP 1:-

Take half a meter green coloured art silk cloth
Measure and cut a rectangular piece of about 18" x 24" inches

STEP 2:-

Draw a circle of about 12" inches in diameter on an A3 sized white paper
Draw a waving Santa picture in the circle as shown
You may select any other favourable Santa design of your choice

STEP 3:-

Trace the Santa in the centre of the cloth using carbon paper

STEP 4:-

This is a closeup of the traced Santa

STEP 5:-

Give a base coat of Acrylic Colour - White on the areas that are going to be painted using Liquid Embroidery Cone - Red for the cap, gloves and the jacket
Leave it to dry

STEP 6:-

The cap and the gloves are coloured using a blanket stitched pattern with Liquid Embroidery Cone - Red
The coat is coloured in satin stitch strokes using Liquid Embroidery Cone - Red
The beard and the moustache are coloured in a running stitch pattern using Liquid Embroidery Cone -White
The fur of the coat is coloured in thick close zig zag strokes given using Liquid Embroidery Cone - White

STEP 7:-

The MERRY CHRISTMAS written around the Santa is filled in with even dots of Liquid Embroidery - White for a beaded look

STEP 8:-

A close up of the beaded effect will look like this

STEP 9:-

The circular background for the Santa is coloured using Liquid Embroidery - Light Green in a running stitch pattern
The face of the Santa is painted in a tan colour made by mixing Soft Acrylic Colour - White with a little bit of Burnt Sienna

STEP 10:-

This is a close up of the completely painted Santa
The eyes are yet to be painted

STEP 11:-

Take a newspaper and cut it half at the fold.
Take 4 to 5 cut sheets together and roll them in a thin roll to make the rod for the scrolls
Stick the edges using Fevicol MR
Make two such rods
Colour the rods using Fevicryl Acrylic Colour Pearl Metallic - Gold 352
Give two coats of colour for the rods for an even finish
Leave it to dry

STEP 12:-

Colour the Santa's eyes using Liquid Embroidery Colour - Black and White
Leave it to dry
Make the channels on the top and the bottom side of the fabric for the rods to hold
Fold the fabric on the rear side and stick the edges of the fabric using No Stitch Fabric Glue for the channels
Leave it to dry completely
Insert the paper rods in the channels
Add golden coloured tassels on either sides of the lower rod
Tie a golden string or a cord on the upper rods for hanging

Fevicryl Soft Acrylic Colour - White 227, Burnt Sienna 201, Liquid Embroidery Colours - Red 701, Light Green 704, White 707, Black 708, Fevicryl No Stitch Fabric Glue, Fevicol MR, A3 Sized White Paper, Pencil, Ruler, Yellow Carbon Paper, Green Art Silk Fabric, Newpapers, Golden Coloured Strings / Cords / Lace / Golden Coloured Tassels